Formulaire de contact

Perles magnétiques Lnjnbio pour une quantité ultra-trace de cellules Kit d'extraction d'ADN/ARN231013

PARAMÈTRES DU PRODUIT

  • Numéro de produit.: 231013
  • Méthodes d'extraction: méthode des billes magnétiques
  • Spec: 50T/boîte, 100T/boîte, 200T/boîte
Description
FAQ
Demander un devis

Description

Ultra-trace Amount of Cells ADN/ARN Extraction Kit

 (Méthode des billes magnétiques)

 (Méthode des billes magnétiques)
【Product Introduction】

Various ultra trace cell samples, tel que: cellules, tissue homogenate, cell culture fluid, exfoliated cells, urine, cerebrospinal fluid, secretion and other samples, under the action of guanidinium salts are lysed and release nucleic acid, through the specific adsorption of the magnetic beads to separate the nucleic acid from other impurities in the samples, and then rinsed by the washing solution, to remove the proteins, residual guanidinium salts, etc., and finally, after the elution, to obtain a good purification of the nucleic acid, the obtained The nucleic acid product can be used for PCR amplification, nucleic acid detection and analysis, gene mutation detection and sequencing and other experiments.

【Product advantages】

1、It is suitable for trace samples with large volume and low nucleic acid concentration, micro tissue samples and cultured cells (small amount of cells) samples.

2、Using the specific adsorption property of magnetic beads, the nucleic acid recovery rate is high, no need for centrifugation, easy to operate, the whole extraction process takes 10-30 min.

3、Saving samples, get nucleic acid extraction product volume of 2-20 µL, to ensure the concentration of nucleic acid extracted from trace samples and rare samples, very suitable for rare and precious small amount of cell samples nucleic acid extraction.

4、The whole genome and the whole transcriptome can be extracted at the same time, which can obtain the complete nucleic acid information of a small number of cells with relatively high concentration, and can be directly docked to the third-generation sequencer.

5、Room temperature lysis combined with one-step, nucleic acid is not easy to degrade, maximize the protection of the integrity of the nucleic acid, is very suitable for the whole genome and transcriptome extraction of a small number of 10-500 cellules.

【Product image】

Ultra-Trace Cells DNA /RNA Extraction Kit 231013


【Experimental cases】

Cas 1: Nucleic acids obtained by extracting 0.01 mg, 0.005 mg, 0.002 mg, et 0.001 mg of trace pork cell samples were detected by 1% agarose gel electrophoresis for nucleic acid bands, and the results obtained are shown in the figure below:

1: 0.01mg of pork cell sample extraction product

2: 0.005mg of pork cell sample extraction product

3: 0.002mg of pork cell sample extraction product

4: 0.001mg of pork cell sample extraction product

5: Blank control

Result analysisFrom the results of agarose electrophoresis of the extracted products, it can be seen that 1-4 were able to run DNA electrophoretic bands, indicating that nucleic acids could be extracted from 0.01 mg, 0.005 mg, 0.002 mg, et 0.001 mg of the trace pork cell samples.

Cas 2:Nucleic acids were extracted from trace amounts of human Hela cells as samples, 5 cellules, 10 cellules, 20 cellules, 500 cells were extracted, and the nucleic acids obtained were analyzed using Agilent 4200 Nucleic acid fragment distribution, and the results obtained are shown below

1. The Electropherogram of Agilent 4200 High Sensitivity RNA ScreenTape Assay

D1: 50 Hela cellsG1: 20 Hela cellsB2: 10 Hela cellsE2: 5 Hela cells

2. Peak diagram of the 50/20/10/5 Hela cells extracted

  • Peak diagram of the 5 Hela cells extracted
  • . Qubit’s test results
No.Sample intakeYield(ng/µL
150 Hela cells0.242
2 20 Hela cells 0.136
310 Hela cells0.112
4 5 Hela cells 0.096

Result analysisBy Agilent 4200 electrophoresis results can be seen: 5– 50 traces of human Hela cell samples, can be obtained by the nucleic acid fragments, The extraction products were 18s RNA, 28sRNA, and DNA over 800bp.

UNpplication area】

1、It can be used for early tumor screening, prognosis,s and late recurrence prediction, pregnancy/newborn genetic disease screening, and various types of disease early warning and other precision medicine applications, tracing the pathogenesis of disease, disease prevention, and diagnosis and treatment.

2、It is suitable for precision medicine to formulate treatment plans for tumor cell heterogeneity, which is suitable for the clinical needs of difficult-to-take samples during pregnancy and maternity tests, precious cells,and high accuracy of the results.

Présentation du fournisseur

Société de biotechnologie Shanghai Lingjun., Ltd.a été établi en 2016 et est un fabricant professionnel de matériaux biomagnétiques et de kits d'extraction d'acide nucléique.

Nous avons une riche expérience dans l'extraction et la purification des acides nucléiques, purification des protéines, séparation cellulaire, chimiluminescence et autres domaines techniques.

Nos produits sont largement utilisés dans de nombreux domaines, comme les tests médicaux, tests génétiques, recherche universitaire, sélection génétique, et ainsi de suite. Nous fournissons non seulement des produits, mais pouvons également entreprendre des OEM, ODM, et autres besoins. Si vous avez des besoins connexes, please feel free to contact us at sales01@lingjunbio.com.

FAQ

Nous avons des billes magnétiques en silice, billes magnétiques dans l'acide carboxylique, et divers kits pour l'extraction d'acides nucléiques par la méthode des billes magnétiques (des échantillons peuvent être extraits du sang total, sérum sans plasma, plasmide, etc.), et les spécifications d'emballage des perles magnétiques sont de 2 ml, 10ml, 50ml, 500ml, 1000ml, etc.. Les spécifications d'emballage des kits sont: les bouteilles sont 50T/boîte, 100T/boîte, 200T/boîte, et les kits pré-remplis sont de 32T/boîte, 48T/boîte, 64T/boîte, 96T/boîte, et 48T/boîte. Nous avons 32T/boîte, 48T/boîte, 64T/boîte, 96T/boîte, et ainsi de suite.

Transport terrestre, transport maritime, transport aérien, vous pouvez choisir en fonction de vos besoins.

Bien sûr, we provide customized service and also support OEM\ODM.

D'abord, confirmer la demande, puis signez le contrat; après avoir reçu le paiement, nous expédierons les marchandises dans le délai de livraison stipulé ou mutuellement convenu.

Généralement, nous enverrons les marchandises dans 15 jours ouvrables après réception du paiement; produits personnalisés et grandes quantités de commandes (billes magnétiques ≥ 10L, réactifs d'extraction d'acide nucléique ≥ 300000T) doivent être déterminés par les deux parties pour communiquer avec le délai de livraison.

DEMANDER UN DEVIS

DEMANDER UN DEVIS